Active Thermal Papers and Presentations
Aerosciences / Aerothermal Papers and Presentations
Cryogenics Papers and Presentations
Interdisciplinary Papers and Presentations
Passive Thermal Papers and Presentations
Active Thermal Paper Sessions
Active Thermal Paper Session 1, Monday, 9:00am-11:30am
| 9:00 – 9:30 | Effect of Subcooled Pool Boiling on Heat Flux and Bubble Dynamics using High-Fidelity Direct Numerical Simulations | Sara Youssoufi |
| 9:30 – 10:00 | Three-Dimensional Simulations of Annular Flow Condensation with Two-Phase Inlets in Microgravity Environments | Farshad Barghi Golezani |
| 10:00 – 10:30 | Fluid & Thermal Analysis of a Manifold Microchannel Heat Sink | Jarred Wilhite |
| 10:30 – 11:00 | Experimental Investigation of the Effects of Heating Orientations and Hysteresis in Copper Manifold Microchannel Heat Sinks | Huigang Wang |
| 11:00 – 11:30 | Capturing Interfacial Phase-Change Physics of Flow Condensation Through a Novel Flow Condensation Module | Jiayuan Li |
Active Thermal Paper Session 2, Monday, 1:00pm-3:30pm
| 1:00 – 1:30 | Development Thermal Module: Building a Thermal Desktop Model for Full-Scale, Convective Test Correlation | Collette Gillaspie |
| 1:30 – 2:00 | Development Thermal Module: Full-Scale Environmental Testing for the Dragonfly Lander | Dahway Lin |
| 2:00 – 2:30 | Development of Concentric Vapor Chambers for Heating and Cooling of Advanced Sorption Systems | Elizabeth Seber |
| 2:30 – 3:00 | Two-Phase Flow in Filters and Orifices: In preparation for Measurements on ISS Packed Bed Reactor Experiment-Water Recovery Series (PBRE-WRS) | Henry Nahra |
Aerosciences / Aerothermal Paper Sessions
Aerosciences / Aerothermal Paper Session 1: Tuesday, 8:30am-10:00am
| 8:30 – 9:00 | Hypersonic Aerothermodynamics Modeling of Two Reentry Flight Experiments using CFD++ | Bruno Lopez |
| 9:00 – 9:30 | Implementation of a WENO High-Resolution Scheme | Michael Harris |
Aerosciences / Aerothermal Paper Session 2: Tuesday, 1:00pm-2:30pm
| 1:00 – 1:30 | Aerothermodynamic Optimization and Design Analysis of a Novel Reusable Launch Vehicle using Numerical Techniques | Fariha Rahman |
| 1:30 – 2:00 | Validation of Artemis I Aerothermal Design Models Using Developmental Flight Instrumentation | Brandon Mobley |
| 2:00 – 2:30 | Experimental characterization of thermal conductivity of the carbon ablator FiberForm across wide operating temperatures | Todd Otanicar |
Cryogenics Paper Sessions
Cryogenics Paper Session 1, Wednesday, 8:00am-10:00am
| 8:00 – 8:30 | A Summary of Recent SBIR and STTR Projects in Support of Cryogenic Fluid Management Modeling | Justin Pesich |
| 8:30 – 9:00 | Development of an equation to characterize heat flux through IMLI and a method to implement in Thermal Desktop® | Brian Hamill |
| 9:00 – 9:30 | Experimental and Numerical Investigations on Flow Boiling and Heat Transfer Characteristics during the Transfer Line Chilldown Process | Jayachandran Narayanan |
| 9:30 – 10:00 | Correlation of Thermal Desktop Cryogenic Model through Implementation with Centaur Optimization Software | Ellen Smith |
Cryogenics Paper Session 2, Wednesday, 10:15am-11:15am
| 10:15 – 10:45 | Development of Cryogenic Methane Constant Conductance Heat Pipe (CCHP) | Sandeep Hatte |
| 10:45 – 11:15 | Hydrophobicity of Cryogenic Fluids for Fuel Transfer in Space Applications | Martin Rosales |
Cryogenics Paper Session 3, Wednesday, 1:00pm-3:00pm
| 1:00 – 1:30 | Design of a low gravity vane liquid acquisition device for cryogenic liquids using first principles modeling, CFD assessment, and scale model ground testing techniques | Mark Wollen |
| 1:30 – 2:00 | Validation of Computational Fluid Dynamics Model for Pressurized Expulsion of Liquid Methane using Non-Condensable Pressurant | Nelson Longmire |
| 2:00 – 2:30 | Evaluation of several physics-based phase change models for numerical simulation of evaporation problems | Thanh Hoang Phan |
| 2:30 – 3:00 | Modeling of Evaporation in Cryogenic Fuels Without Tuning Coefficients | Ayaaz Yasin |
Cryogenics Paper Session 4, Wednesday, 3:15pm-4:45pm
| 3:15 – 3:45 | Thermal-Vacuum Testing of a Hybrid Additive Manufactured Pressure Vessel for Broad Area Cooling | Lauren Gronich |
| 3:45 – 4:15 | Lightweight, Flexible, and Thermal Insulating Polyimide Aerogels for Cryogenic Insulation Applications | Sadeq Malakooti |
| 4:15 – 4:45 | Quench front propagation measurement and comparison with inverted annular flow regime using infrared surface temperature profile and high-speed imaging | Jeffrey Mackey |
Interdisciplinary Paper Sessions
Interdisciplinary Paper Session 1: Monday, 3:45pm-4:45pm
| 3:45 – 4:15 | Thermochemical reactors for energy storage and continuous processing of pelletized materials | Andre Benard |
Interdisciplinary Paper Session 2: Tuesday, 3:15pm-4:45pm
| 3:15 – 3:45 | Thermal Analysis of Refueling Propellant Systems for PPE | Ethan Sparks |
| 3:45 – 4:15 | Rapid Thermal Desktop Model Development for HALO Thermal Management System | Mark Whittum |
Interdisciplinary Paper Session 3, Thursday, 8:00am-10:00am
| 8:30 – 9:00 | Quadratic Elements for Thermal Analysis – Verification, Benefits, and Usage | Douglas Bell |
| 9:00 – 9:30 | Development, Validation, and Practical Application of a Fast-Solving General-Purpose Thermal Analysis Tool – ONYX | Dean Schrage |
| 9:30 – 10:00 | Experimental Testing of a Thermoacoustic Thermal Management System | Luis Rodriguez |
Interdisciplinary Paper Session 4: Thursday, 10:15am-11:15am
| 10:15 – 10:45 | A Transient Multiphysics Thermal/CFD Simulation Analysis of a Molten Regolith Electrolysis Reactor Within a Thermal Vacuum Chamber. | William Dziedzic |
| 10:45 – 11:15 | Thermal Correlation of Reduced Models Using an Adjoint-Based Solver | Florian Sanchez |
Interdisciplinary Paper Session 5: Thursday, 12:30pm-2:00pm
| 12:30 – 1:00 | Multifidelity Cosimulation of Hydrogen Fuel Cell Aero Engine | Vlad Goldenberg |
| 1:00 – 1:30 | E-1 High Pressure Liquid Hydrogen Vent Line Mishap | Richard Wear |
| 1:30 – 2:00 | Ablation and Adhesion Material Testing in High Vacuum For Lunar Construction and Thermal Management | Eduardo Bidot |
Interdisciplinary Paper Session 6: Thursday, 12:30pm-2:00pm
| 12:30 – 1:00 | Testing simplified assumptions during liquid-vapor phase change using data from International Space Station (ISS) experiments | Unmeelan Chakrabarti |
| 1:00 – 1:30 | Modular Assembled Radiators for NEP VehicLes (MARVL), an Overview | Amanda Stark |
| 1:30 – 2:00 | Demonstration and Analysis of Thermal Management System (TMS) for Ice Extraction and Ice Collection for Lunar Ice Miners | Sai Kiran Hota |
Interdisciplinary Paper Session 7: Thursday, 2:15pm-4:30pm
| 2:15 – 2:45 | Thermal Vacuum Testing Strategy and Thermal Desktop Model Correlation for the Moon to Mars Planetary Autonomous Construction Technologies (MMPACT) Robotic Terrestrial Arm | Savanna Lyles |
| 2:45 – 3:15 | Nighttime Integrated Thermal and Electricity (NITE) System – A Foothold Technology for Early-Stage Heat and Power Requirements on the Moon | Amir Bayani |
Passive Thermal Paper Sessions
Passive Thermal Paper Session #1, Monday, 9:00am-11:15am
| 9:00 – 9:30 | Production and characterization of additively manufactured radiator panels with integral branching heat pipes for high temperature heat rejection | Tatiana El Dannaoui |
| 9:30 – 10:00 | Development of High-Temperature Lightweight Radiator Panels with 3-D Printed Titanium Loop Heat Pipes | Parth Agrawal |
| 10:00 – 10:30 | Additive manufacturing and experimental characterization of nickel-titanium shape-memory alloy wick structures and heat pipes for spacecraft thermal control | Tomé Guenka |
| 10:30 – 11:00 | Spacecraft Window Design from a Thermal Perspective | Cheyn Worn |
| 11:00 – 11:30 | TARDIS: Accelerating TVAC Transitions Design & Performance | Seth Abramczyk |
Passive Thermal Paper Session #2, Monday, 1:30pm-3:30pm
| 1:30 – 2:00 | An approach to thermal modelling and analysis of Solar Array Wings for Space Rider | Adeeb Nazeeruddin |
| 2:00 – 2:30 | A Method for Approximating Large Radiation Networks with Smaller Radiation Networks to Enhance Computational Efficiency | Michael Saeger |
| 2:30 – 3:00 | Thermal Design and Analysis of the StarBurst Instrument | Stephanie Mauro |
| 3:00 – 3:30 | L’Ralph Early On-Orbit Thermal Performance and Investigation of the Colder-than-Expected Cryoradiator | Daniel Bae |
Passive Thermal Paper Session #3, Monday, 3:45pm-4:45pm
| 3:45 – 4:15 | Water Azeotropes for Advanced Spacecraft Thermal Control Applications | John Rosenfeld |
| 4:15 – 4:45 | Oscillating Heat Pipe Radiators for 150-300°C Applications | Alex Miller |
Passive Thermal Paper Session #4, Tuesday, 8:30am-10:00am
| 8:30 – 9:00 | Thermal Impacts of Lunar Dust for Rovers | Abigail Howard |
| 9:00 – 9:30 | Preparing the Lunar Outpost Mobile Autonomous Prospecting Platform (MAPP) Rover for Thermal Success at the Lunar South Pole | Kaila Pfrang |
| 9:30 – 10:00 | Lunar Latitude and Terrain Radiator Sensitivity Study | William Birmingham |
Passive Thermal Paper Session #5, Tuesday, 10:15am-11:15am
| 10:15 – 10:45 | Volatiles Investigating Polar Exploration Rover (VIPER) Thermal Management System (TMS) Design, Development, and Testing | Joshua Smay |
| 10:45 – 11:15 | Advanced Electric Propulsion System Integrated Thermal Analysis Summary | Lara Schoeffler |
Passive Thermal Paper Session #6, Tuesday, 1:00pm-3:00pm
| 1:00 – 1:30 | Development of Modular 3U Form Factor Pulsating Heat Pipe Based Plate Heat Spreader for Electronics Cooling | Calin Tarau |
| 1:30 – 2:00 | Rapidly Manufacturable Loop Heat Pipes with Deployable Radiator for SmallSats | Lawrence Bradley |
Passive Thermal Paper Session #7, Tuesday, 3:15pm-4:45pm
| 3:15 – 3:45 | Modeling Martian Surface Environments in Thermal Desktop | Daniel Popok |
| 3:45 – 4:15 | Dragonfly: Investigation of Thermal Insulation via Testing and Analysis | Marisa Teti |
| 4:15 – 4:45 | Passive Cooling for Mercury Surface Lander Electronics | Geoffrey Landis |
Passive Thermal Paper Session #8, Wednesday, 8:00am-10:00am
| 8:30 – 9:00 | Planning for Validation of Optical Property Degradation Predictions Using On-Orbit Telemetry | Jared Berg |
| 9:00 – 9:30 | Tall Tower Lunar Thermal Analysis for the Thermoplastics Development for Exploration Applications (TDEA) Thermoplastic Space Point Design (TPSD) | Will Grier |
| 9:30 – 10:00 | Clipper REASON Thermal Correlation Lamp Modeling | Lina Li Maricic |
Passive Thermal Paper Session #9, Wednesday, 10:15am-11:15am
| 10:15 – 10:45 | Variable Emissivity Materials for Thermal Radiators: Modeling and Applications | Derek Hengeveld |
| 10:45 – 11:15 | Variable Emissivity Material (VEM) modeling in Thermal Software System (TSS) | Joseph Clay |
Passive Thermal Paper Session #10, Wednesday, 1:00pm-3:00pm
| 1:00 – 1:30 | Numerical Analysis of Thermal Shielding for Lunar Habitat Design | Matt Buckley |
| 1:30 – 2:00 | Passive Thermal Control for High Power Electronic Boxes | Andrew Kraus |
| 2:00 – 2:30 | SMILE SXI Instrument Root Cause Thermal Analysis | Matthew Vaughan |
Passive Thermal Paper Session #11, Wednesday, 3:15pm-4:45pm
| 3:15 – 3:45 | Thermal Vacuum Testing of a Modified COTS Camera for Lunar Environments | Parker Weide |
| 3:45 – 4:15 | Passively Deployed Radiators for Transfer and Rejection of CubeSat Waste Heat | Rydge Mulford |
Passive Thermal Paper Session #12, Thursday, 8:00am-10:00am
| 8:00 – 8:30 | Large format high temperature oscillating heat pipes | Alex Miller |
| 8:30 – 9:00 | Intermediate Temperature Ceramic Heat Pipe Modeling and Optimization | Andrew van Paridon |
| 9:00 – 9:30 | Dryout Mapping of Oscillating Heat Pipes | Zachary Wong |
| 9:30 – 10:00 | Operating characteristics of gravity-driven mode of gravity-assisted Cryogenic Loop Heat Pipe for lunar exploration | Takeshi Yokouchi |