The TFAWS 2019 Proceedings are included below. The proceedings can be navigated by using the shortcuts below, or by using the “Crtl+F” search feature to search by title, paper identifier, or author.
Active Thermal Papers and Presentations
Aerothermal Papers and Presentations
Cryothermal Papers and Presentations
Interdisciplinary Papers and Presentations
Passive Thermal Papers and Presentations
Short Courses (only publicly available courses are listed)
Active Thermal Paper Sessions
Session Chairs:
Ryan Edwards, NASA Glenn Research Center
Ryan Gilligan, NASA Glenn Research Center
Alex Scammell, NASA Langley Research Center
Active Thermal Paper Session 1
TFAWS19-AT-01 | Design, Thermal and Computational Fluid Dynamic Analyses on Loop Heat Pipe Wick and Manufacturing with Selective Laser Togaru Lavanith and Naganathan Karthik TFAWS19-AT-01 Paper |
---|---|
TFAWS19-AT-02 | Experimental and Numerical Analysis of Flat Plate Loop Heat Pipes Thermal Resistance Performance Shahid Manik, Jin Jin, Y. Guang, and Wu Jingyi Presentation not publicly available. |
TFAWS19-AT-04 | Advances in Cost Effective Thermal Management for Small Satellites Chien-Hua Chen and Ryan Spangler |
TFAWS19-AT-09 | Numerical Simulation of Transient Behavior of Vapor-Liquid Distribution in a Loop Heat Pipe Takuya Adachi, Koji Fujita, and Hiroki Nagai |
TFAWS19-AT-11 | Thermohydraulic Characterization of Additive Manufactured Heat Exchangers using Lattice Structure Aurelien Conrozier, Damien Serret, and Jean-Michel Hugo TFAWS19-AT-11 Paper |
TFAWS19-AT-16 | Fully Resolved Numerical Simulations of Complex Multiphase Flows Jiacai Lu and Gretar Tryggvason |
Active Thermal Paper Session 2
TFAWS19-AT-03 | 24 Hour Consumable-based Cooling System for Venus Lander Kuan-Lin Lee and Calin Tarau |
---|---|
TFAWS19-AT-07 | Post Launch and Early Mission Thermal Performance of Parker Solar Probe through the First Two Solar Orbits Carl Ercol and G. Allan Holtzman TFAWS19-AT-07 Paper |
TFAWS19-AT-12 | Demonstration Testing for Ground Servicing of the Commercial Crew Vehicle Emergency Breathing Air Assembly (CEBAA) Kristina Gonzalez and Zachary Shaver TFAWS19-AT-12 Paper |
TFAWS19-AT-13 | P1 External Active Thermal Control System (EATCS) Ammonia Leak on the International Space Station (ISS) Darnell Cowan, Timothy Bond, and Jordan Metcalf |
TFAWS19-AT-14 | Calculation of Radiative Fin Performance Parameters for Radiator Analysis using Numerical Methods Louis Jorski |
Aerothermal Paper Session
Session Chairs:
Robin Beck, NASA Ames Research Center
Jeff Hill, NASA Ames Research Center
Andrew Brune, NASA Langley Research Center
TFAWS19-AE-04 | Aeroheating Measurements of BOLT Aerodynamic Fairings and Transition Module Elizabeth Rieken and Scott Berry Presentation not publicly available. |
---|---|
TFAWS19-AE-05 | Aerodynamic and Aerothermal Simulations of Mars Concept Vehicles using Overset DPLR Chun Tang |
Cryothermal Paper Session
Session Chairs:
Monica Guzik, NASA Glenn Research Center
Paul Whitehouse, NASA Goddard Space Flight Center
Patrick Junen, NASA Marshall Space Flight Center
TFAWS19-CT-01 | Optimization of Design and Computational Fluid Dynamic Analysis of Cryogenic Loop Heat Pipe Togaru Lavanith, Sirivolu Akilesh, and Nagananthan Karthik Presentation not publicly available. |
---|---|
TFAWS19-CT-02 | CFD Modeling of Cryogenic Chill-down through a Complex Channel Justin Pesich |
ITAR Paper Sessions
ITAR Paper Sessions are restricted to US Citizens and US Lawful Permanent Residents only, and are not publicly available for posting. If you are a US Citizen or Lawful Permanent Resident and wish to view the session content, please request it through the authors’ institutions/agencies directly.
ITAR Paper Session 1: Active Thermal
Session Chairs:
Ryan Edwards, NASA Glenn Research Center
Ryan Gilligan, NASA Glenn Research Center
Alex Scammell, NASA Langley Research Center
TFAWS19-AT-15 | Using Medium Fidelity Mockups to Visualize Internal Air Flow for NASA’s Four Bed Carbon Dioxide Scrubber (RBCO2) Kevin Higdon, Shawn Breeding, and Parker Weide Presentation not publicly available. |
---|
ITAR Paper Session 2: Aerothermal
Session Chairs:
Robin Beck, NASA Ames Research Center
Jeff Hill, NASA Ames Research Center
Andrew Brune, NASA Langley Research Center
TFAWS19-AE-02 | Ablator Thermal Analysis of a Multi-Block Radiant Test Zaida Hernandez Presentation not publicly available. |
---|---|
TFAWS19-AE-03 | High Altitude Vehicle Sounding Rocket Re-Entry Heating Software Assessment Lindsey Seo Presentation not publicly available. |
ITAR Paper Session 3: Passive Thermal
Session Chairs:
Eric Groß, NASA Goddard Space Flight Center
Eric Malroy, NASA Johnson Space Center
Ruth Amundsen, NASA Langley Research Center
TFAWS19-PT-16 | NASA’s SLS Launch Vehicle Cross-Element/Cross-Program Thermal Integration Callie McKelvey, Brian Hamill, and Patrick Junen Presentation not publicly available. |
---|
Interdisciplinary Paper Sessions
Session Chairs:
Arturo Avila, NASA Jet Propulsion Center
Carlos Gomez, NASA Marshall Space Flight Center
Karen Berger, NASA Langley Research Center
Interdisciplinary Paper Session 1
TFAWS19-ID-05 | Thermal Vacuum Chamber Calibration with 12U Cubesat Model Nathan Cordrey and Chris Strickland |
---|---|
TFAWS19-ID-09 | Thermal Characterization of SiC MOSFET Devices Andras Vass-Varnai |
TFAWS19-ID-15 | Current Activities at the FAA Office of Commercial Space Transportation Christopher Evans Presentation not publicly available. |
TFAWS19-ID-18 | Thermal Analysis and Testing of the 12.5 kW HERMeS Hall Thruster Sean Reilly, Robbie Lobbia, Ryan Conversano, and Rich Hofer |
TFAWS19-ID-19 | Assembly and Integrated Systems Testing for the Flow Boiling and Condensation Experiment (FBCE) Jesse deFiebre and Monica Guzik |
Interdisciplinary Paper Session 2
TFAWS19-ID-01 | Thermal and Structural Analysis of the ExoMars Navigation and Localization Cameras Christopher Pye, Pierre-Luc Messier, and Tim Elgin TFAWS19-ID-01 Paper |
---|---|
TFAWS19-ID-07 | Pressure-Based Venting Thermal Model for the Dream Chaser Cargo System R. S. Miskovish and S. W. Miller TFAWS19-ID-07 Paper |
TFAWS19-ID-10 | Fluid Transient Analysis of Propellant Feedlines during a Priming Event Andre LeClair, Alex Boehm, and Alok Majumdar Presentation not publicly available. |
TFAWS19-ID-14 | Thermal Design Challenges for In-Flight Exposure to an Electric Propulsion Plasma Plume Environment Evan Racine |
TFAWS19-ID-16 | On-Orbit Xenon Refueling Loading Times and Transient Analysis Ben Nugent |
Interdisciplinary Paper Session 3
TFAWS19-ID-03 | Thermal Analysis of Spacecraft using Data Assimilation Hiroto Tanaka, Hiroki Nagai, and Takashi Misaka |
---|---|
TFAWS19-ID-04 | Rocket Engine Digital Twin David Mena, Sylvain Pluchart, Stephane Mouvand, and Oliver Broca TFAWS19-ID-04 Paper |
TFAWS19-ID-08 | Design and Test of a Direct-Metal-Laser-Sintering (DMLS) Fabricated Microchannel Heat Exchanger with Nano-enhanced Heat Transfer Fluid for Thermal Management in Space Exploration Jaime Rios, Takele Gemeda, and Jiajun Xu Presentation not publicly available. |
TFAWS19-ID-11 Paper | Qualification of Reusable Components for Launch Vehicles Michael O’Malley |
TFAWS19-ID-20 | Thermal Analysis of M2020 DRCS Thrusters for Various EDL Trajectories Sean Reilly, Juan Villalvazo, and Jennifer Miller |
Passive Thermal Paper Sessions
Session Chairs:
Eric Groß, NASA Goddard Space Flight Center
Eric Malroy, NASA Johnson Space Center
Ruth Amundsen, NASA Langley Research Center
Passive Thermal Paper Session 1
TFAWS19-PT-01 | Thermo-Radiative Cell – A New Waste Heat Recovery Technology for Space Power Applications Jianjian Wang, Chien-Hua Chen, Richard Bonner, and William Anderson |
---|---|
TFAWS19-PT-07 | Passive Thermal Analysis and Regulation for a Lightweight Lunar CubeRover Oleg Sapunkov |
TFAWS19-PT-08 | Design and Test of a Structurally-Integrated Heat Sink for the Maxwell X-57 High Lift Motor Controller Ryan Edwards and Andrew Smith |
TFAWS19-PT-09 | Challenges of Designing a Passive Thermal Control System for the Astrobotic Peregrine Lunar Lander Stephanie Mauro |
TFAWS19-PT-10 | Thermal Development of a Commercial Off the Shelf (COTS) Camera for Exploration Upper Stage (EUS) Deborah Hernandez TFAWS19-PT-10 Paper |
TFAWS19-PT-11 | Thermal Environment Modeling Practices for the Descent Trajectory of Lunar Landers Alex Szerszen TFAWS19-PT-11 Paper |
TFAWS19-PT-19 | Thermal Design and Qualification Testing of the KA-Band Radar Interferometer (KARIN) Instrument Thermal Control System Louis Tse and Ruwan Somawardhana |
Passive Thermal Paper Session 2
TFAWS19-PT-04 | Review of MLI Behavior at Low Temperatures and Application to L’Ralph Thermal Modeling Daniel Bae and Juan Rodriguez-Ruiz |
---|---|
TFAWS19-PT-12 | Thermal Interface Material Selection for Large Electronics Boxes David Steinfield |
TFAWS19-PT-14 | Liquid Metal Elastomer Composites as a Soft Thermal Interface Material for Low Temperature (-80°C) Applications Navid Kazem, Mohammad Malakooti, Jiajun Yan, Eric Markvicka, Chengfeng Pan, Krzysztof Matyjaszewski, and Carmel Majidi |
TFAWS19-PT-15 | Thermal Characterization of 3D Printed Lattice Structures Travis Belcher and R. Gregory Schunk |
TFAWS19-PT-17 | Application and Development of Atomic Layer Deposition Techniques to Improve Thermo-optical Coatings for Spacecraft Thermal Control and Advanced Optical Instruments Vivek Dwivedi |
Passive Thermal Paper Session 3
TFAWS19-PT-02 | Variable View Factor Two-Phase Radiator Andrew Lutz and Calin Tarau |
---|---|
TFAWS19-PT-03 | Modelling of Radiative Heat Transfer of a Square Trihedral Design Radiator Panel on the Lunar Surface Colin Butler, Ronan Flanagan, Jeff Punch, and Nick Jeffers |
TFAWS19-PT-05 | Using Thermal Desktop for Heater Design in Thermal Vacuum Chambers Tayera Ellis and Ryan Noe Presentation not publicly available. |
TFAWS19-PT-06 | Optimizing Thermal Radiator Designs Using the Veritrek Software Lina Maricic, R. Scott Miskovish, Jacob Moulton, and Derek Hengeveld |
TFAWS19-PT-13 | Thermal Vacuum Testing and Feasibility Investigations for VO2-Based Variable Emittance Coatings Sydney Taylor and Liping Wang |
TFAWS19-PT-18 | A Streamlined Approach to Spatial Mapping of Complex 3D Thermal Boundary Condition Data Robert Hawkins and Carl Poplawsky Presentation not publicly available. |
Short Courses
Methods for Testing Heatshield Materials Short Course Robin Beck, NASA Ames Research Center |
Non-Intrusive Measurement Techniques for Flow Characterization of Hypersonic Wind Tunnels P.M. Danehy and J. Weisberger, NASA Langley Research Center C. Johansen, University of Calgary D. Reese and T. Fahringer, National Institute of Aerospace N.J. Parziale, Stevens Institute of Technology C. Dedic, University of Virginia J. Estevadeordal, North Dakota State University B.A. Cruden, AMA Inc at NASA Ames Research Center Non-Intrusive Measurement Techniques for Flow Characterization of Hypersonic Wind Tunnels Paper |
Thermal & Fluids Analysis and the NASA Launch Services Program Cindy Fortenberry, NASA Kennedy Space Center Thermal, Environments & Launch Approval Branch Brandon Marsell, NASA Kennedy Space Center Fluids, Environments & Launch Approval Branch |
Heat Pipes Short Course William G. Anderson and Calin Tarau, Advanced Cooling Technologies, Inc. |